- On-the-fly hashing of the transmitted data.
- Progress bar of how much data has already been sent.
- Wiping of disks with known patterns.
- Verification that the image is identical to the original drive, bit-for-bit.
- Simultaneous output to more than one file/disk is possible.
- The output can be split into multiple files.
- Logs and data can be piped into external applications.
The program only produces raw image files.
dcfldd if=/dev/sourcedrive hash=md5,sha256 hashwindow=10G md5log=md5.txt sha256log=sha256.txt \ hashconv=after bs=512 conv=noerror,sync split=10G splitformat=aa of=driveimage.dd
This command will read ten Gigabytes from the source drive and write that to a file called driveimage.dd.aa. It will also calculate the MD5 hash and the sha256 hash of the ten Gigabyte chunk. It will then read the next ten gigs and name that driveimage.dd.ab. The md5 hashes will be stored in a file called md5.txt and the sha256 hashes will be stored in a file called sha256.txt. The block size for transferring has been set to 512 bytes, and in the event of read errors, dcfldd will write zeros.
While there is a Windows executable of DCFLDD out there, it can be difficult to use. There is currently a PowerShell Script that can be used to help newcomers out, located here
This tool is not suitable for imaging faulty drives:
- dcfldd is based on an extremely old version of dd: it's known that dcfldd will misalign the data in the image after a faulty sector is encountered on the source drive (see the NIST report), and this kind of bug (wrong offset calculation when seeking over a bad block) was fixed for dd in 2003 (see the fix in the mailing list);
- similarly, dcfldd can enter an infinite loop when a faulty sector is encountered on the source drive, thus writing to the image over and over again until there is no free space left.